| Customization: | Available |
|---|---|
| After-sales Service: | 6 Month |
| Warranty: | 6 Month |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The LHP40M wet spray manipulator is equipped with a Yunnei engine and is mounted on wheels. The entire structure has been optimized and modernized, resulting in a reduced failure rate. Stable conveying capacity of pumping system,minimizing maintenance expenses.The equipment offers the benefits of a substantial injection volume, minimal pipe blockage, low rebound, and reduced dust emissions. The spraying system features wireless remote control operation, facilitating precise control over the movement of the robotic arm. Offers high speed, effectiveness, and energy-saving.
Maximum spray volume reaches 40m³/h, with high spraying efficiency;
Low rebound, less dust, and high construction quality;
The diesel-electric dual power system supports electric construction and diesel-powered emergency response to ensure construction progress;
The machine features a small footprint, good flexibility, and is easy to enter and exit the site;
Features two quick-setting agent tanks with a capacity of 1.5 cubic meters, which can meet the construction volume for large tunnel sections.
| Transport dimensions (L × W × H) | 8340×2700×3250mm |
| Total weight | 16t |
| Engine power | 108kW |
| Installed electrical power | 75kW |
| Operating mode | Electric construction + diesel-powered emergency |
| Control mode | Wireless remote control |
| Operating voltage | 380V |
| Operating range (width × height) | 26×15m |
| Chassis form | Operating chassis |
| Driving mode | One-way driving |
| Driving and steering methods | Four-wheel drive, front-wheel steering |
| Minimum ground clearance | 420mm |
| Maximum grade | 29% |
| Turning radius | 10m (two wheels) |
| Maximum speed | 15km/h |
| Approach angle/departure angle | 16°/16° |
| Maximum spraying volume | 40m³/h |
| Maximum particle size for spray aggregate | 25mm |
| Hopper capacity | 0.3m³ |
| Capacity of quick-setting agent tank | 1.5m³ |
| Form of quick-setting agent pump | Squeeze pump |
| Discharge volume | / |
| Discharge pressure | / |
){kind=link}