New Generation Tunneling Equipment, Ldj400 Multifunctional Electric Roadheader Tunneling Machine/Underground Boring Machine

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Total Weight: 82t
• Engine Power: 176kw
• Installed Electrical Power: 400kw
• Operating Mode: Electric Construction + Diesel-Powered Emergency
• Control Mode: Wireless Remote Control + Manual Control
• Operating Voltage: 1140V
• Operating Range (Width × Height): 12×10m
• Operating Speed: 1.5km/H
• Adjustable Cross-Section Heigh: 6~9.5m
• Adjustable Cross-Section Width: ≥6m
• Excavation Efficiency: 0~35m³/H
• Slag Discharge Efficiency: /
• Transport Package: Nothing
• Specification: 16000× 3000× 3600mm
• Trademark: LANHI
• Origin: China

Product Description

Product Description

The  LDJ400  series  multi-functional  tunnel  boring  machine  is  a  special  equipment  used  for  non-explosive  tunnel excavation. This equipment mainly uses a high-frequency hammer or breaker hammer to break rocks, bucket teeth or drill rods to wedge the rock in the surrounding rock and use the gravity of the free face under the surrounding rock to automatically break through it. (High-frequency hammers are mainly used for rocks below 40MPa; breaking hammers are used for rocks with higher hardness and poor development) . The equipment features local control + wireless remote control and can be adapted to tunnel excavation of 6 to 9.5 meters. It combines the functions of high-frequency rock breaking, quick excavation of soft soil, contour trimming, spray dust removal and other functions. This makes it suitable for construction in areas where blasting is restricted (such as airports, residential areas and wildlife reserves) . It is very flexible and can meet the construction needs of various types of surrounding rocks, reducing over- and under-excavation, and avoiding landslides and other issues.

 Comprehensive excavation efficiency for grade IV and V surrounding rocks up to 50m³/h;
The entire machine is equipped with dust removal spray  system to effectively control dust and ensure a safe construction environment;
Patented three-toothed base or two -toothed base and a high-frequency breaker hammer to achieve fast rock breaking speed and strong impact;

Slight turbulence to surrounding rock: Non-explosive excavation method causes little disturbance to surrounding rock;

Precise over- and under-excavation control: The movement of the entire machine is accurately controlled, with over- and under-excavation of the contour surface controllable to within 20 centimeters;

Remote control: All movements of the entire machine are controlled remotely, making it easy and convenient to operate. The operator can flexibly adjust the   position for more convenient operation;

Diesel-electric dual power system: Diesel-powered emergency and transmission, and electric construction are supported, minimizing construction costs; no exhaust gas pollutes the air in the tunnel and heat accumulation is kept to a minimal level    during construction;

Slag discharge efficient : Some models are equipped with slag collecting and slag    discharging devices, with a slag discharge capacity of 180m³/h, which can meet the    needs of small-section equipment for rapid slag discharging without leaving the site.

Product Parameters

LDJ400A series
Model	LDJ400A-1	LDJ400A-2	LDJ400A-3	LDJ400A-4
Transport dimensions     (length × width × height)	16000×3000×3600mm	16000×3000×3600mm	16000×3000×3600mm	16000×3000×3600mm
Total weight	82t	82t	82t	82t
Engine power	176kW	176kW	176kW	176kW
Installed electrical power	400kW	400kW	400kW	400kW
Operating mode	Electric construction +diesel-powered emergency	Electric construction +diesel-powered emergency	Electric construction +diesel-powered emergency	Electric construction +diesel-powered emergency
Control mode	Wireless remote control + manual control	Wireless remote control + manual control	Wireless remote control + manual control	Wireless remote control + manual control
Operating voltage	1140V	1140V	1140V	1140V
Operating range  (width × height)	12×10m	12×10m	12×10m	12×10m
Slag discharge function	/	/	/	/
High frequency hammer model	H5	H8	H10	H12
Operating speed	1.5km/h	1.5km/h	1.5km/h	1.5km/h
Adjustable cross-section height	6~9.5m	6~9.5m	6~9.5m	6~9.5m
Adjustable cross-section width	≥6m	≥6m	≥6m	≥6m
Excavation efficiency	0~35m³/h	0~50m³/h	0~60m³/h	0~70m³/h
Slag discharge efficiency	/	/	/	/

 

 

Detailed Photos

FAQ

1,What can you buy from us?
Our current main products include comprehensive solutions for underground engineering machinery and intelligent mining equipment. This includes tunnel boring machines, integrated arch anchoring and spraying trolleys, arch anchoring trolleys, integrated arch drilling trolleys, arch frame installation trolleys, wet spraying rigs, and rock drilling rigs. We have the capacity to provide customers with integrated total solution services.

2,What about the MOQ?
The Minimum Order Quantity (MOQ) is 1 set.

3,What payment terms do you accept?
We accept T/T with a 50% prepayment.

4,What about the order lead time?
The usual lead time is 15 days.

5,What logistics methods can you use for shipment?
Truck delivery can be arranged in Central Asia and Russia, and you can also choose rail and sea shipping.

6,How is your delivery time?
The delivery time via China-Europe trains is 15 to 20 days, while sea shipping takes approximately 2 to 3 months.

7,How about your customer service and after-sales service?
We offer 24/7 online support and provide after-sales support in Russia and Central Asia.