Product Description
The LHP40K-G wheeled wet spray manipulator is a special piece of equipment developed and upgraded based on domestic initial tunnel support concrete spraying technology and high-altitude construction conditions. The maximum spraying volume is 40m³/h, and the equipment is widely used in tunnel engineering, water conservancy engineering, municipal engineering, road and bridge engineering, and other applications. This equipment features a large spraying volume, low rebound, stable and reliable performance, and pipes will not easily block. It is suitable for both full-section, half-section and multi-step excavation.
The equipment is suitable for construction at altitudes from 2000 meters to 4500 meters, and is suitable for operation at high-altitude plateaus;
It is equipped with a plateau-type air compressor and does not require any external air source;
Maximum spray volume up to 40m³/h, with good spraying efficiency and blockage-resistant pipes;
The diesel-electric dual power system supports electric construction and diesel-powered emergency response to ensure construction progress;
Features two quick-setting agent tanks with a capacity of 1.5 cubic meters, which can meet the construction volume for large tunnel sections.
Product Parameters
| Transport dimensions (L × W × H) |
8400×2850×3300mm |
| Total weight |
19t |
| Engine power |
103kW |
| Installed electrical power |
165kW |
| Operating mode |
Electric construction + diesel-powered emergency |
| Control mode |
Wireless remote control |
| Operating voltage |
380V |
| Operating range (width × height) |
26×15m |
| Chassis form |
Operating chassis |
| Driving mode |
One-way driving |
| Driving and steering methods |
Four-wheel drive, front-wheel steering |
| Minimum ground clearance |
460mm |
| Maximum grade |
29% |
| Turning radius |
10m (two wheels) |
| Maximum speed |
15km/h |
| Approach angle/departure angle |
21°/19° |
| Maximum spraying volume |
40m³/h |
| Maximum particle size for spray aggregate |
25mm |
| Hopper capacity |
0.3m³ |
| Capacity of quick-setting agent tank |
1.5m³ |
| Form of quick-setting agent pump |
Squeeze pump |
| Discharge volume |
20m³/min |
| Discharge pressure |
0.7Mpa |
Detailed Photos
Audited Supplier 
){kind=link}