| After-sales Service: | 6 Month |
|---|---|
| Warranty: | 6 Month |
| Certification: | CE, RoHS, ISO 9001:2000, ISO 9001:2008 |
| Condition: | New |
| Total Weight: | 19t |
| Engine Power: | 103kw |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The LHP40K wheeled wet spray manipulator is a special equipment developed and upgraded based on the domestic initial tunnel support concrete shotcrete technology and construction conditions in areas below 2,000 meters above sea level. Its maximum injection volume reaches 40m³/h, and it is widely used in tunnel engineering, water conservancy engineering, municipal engineering road and bridge engineering, etc. This equipment features a large spraying volume, low rebound, stable and reliable performance, and pipes will not easily block. It is suitable for both full-section, half-section and multi-step excavation.
Suitable for construction at altitudes below 2,000 meters and on high-altitude plateaus;
Equipped with an air compressor suitable for use on plateaus, and does not require an external air source;
Maximum spray volume up to 40m³/h, with good spraying efficiency and blockage-resistant pipes;
The diesel-electric dual power system supports electric construction and diesel-powered emergency response to ensure construction progress;
Features two quick-setting agent tanks with a capacity of 1.5 cubic meters, which can meet the construction volume for large tunnel sections.
| Transport dimensions (L × W × H) | 8400×2850×3300mm |
| Total weight | 19t |
| Engine power | 103kW |
| Installed electrical power | 150kW |
| Operating mode | Electric construction + diesel-powered emergency |
| Control mode | Wireless remote control |
| Operating voltage | 380V |
| Operating range (width × height) | 26×15m |
| Chassis form | Operating chassis |
| Driving mode | One-way driving |
| Driving and steering methods | Four-wheel drive, front-wheel steering |
| Minimum ground clearance | 460mm |
| Maximum grade | 29% |
| Turning radius | 10m (two wheels) |
| Maximum speed | 15km/h |
| Approach angle/departure angle | 21°/19° |
| Maximum spraying volume | 40m³/h |
| Maximum particle size for spray aggregate | 25mm |
| Hopper capacity | 0.3m³ |
| Capacity of quick-setting agent tank | 1.5m³ |
| Form of quick-setting agent pump | Squeeze pump |
| Discharge volume | 15m³/min |
| Discharge pressure | 0.7Mpa |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}